PropWare
2.1.2
C++ objects and CMake build system for Parallax Propeller
|
Click here for docs on the
develop
branch.
The following steps explain how to use PropWare's libraries - including PropWare, Simple, and libpropeller - in a SimpleIDE project. Step 2 and onward must be repeated for every new project in SimpleIDE.
<PROPWARE_PATH>
throughout these steps..cpp
not .c
.<PROPWARE_PATH>/include
and then press the "Open" button.<PROPWARE_PATH>/lib
and then press the "Open" button.C
True
-std=gnu++0x -fno-rtti -fno-threadsafe-statics
-lPropWare -lLibpropeller -lSimple
C:\\Program Files (x86)
).<PROPWARE_PATH>\PWCMake\bin
) to your PATH. Excellent instructions for editing PATH exist here. For instance, if you installed PropWare to C:\PropWare
and PATH currently contains C:\propgcc\bin
, the new value would be C:\PropWare\PWCMake\bin;C:\propgcc\bin
.deb
package file.dpkg
to install the file with: sudo dpkg -i PropWare-2.1.2-Generic.deb
. If cmake
is already installed, remove it with sudo dpkg -r cmake
.make
is the recommended build tool to use with PropWare. If it is not already installed, install it with sudo apt-get install make
.rpm
package file.rpm
to install the file with: sudo rpm -i PropWare-2.1.2-Generic.rpm
. If cmake
is already installed, remove it with sudo rpm -e cmake
.make
is the recommended build tool to use with PropWare. If it is not already installed, install it with sudo yum install make
.Raspberry Pis and other ARM platforms are not officially supported. I have run some basic and preliminary tests with the following packages. The packages must be built manually and will therefore not be updated with the same frequency as Windows, Linux x86-64, or Mac OSX packages.
deb
package file.dpkg
to install the file with: sudo dpkg -i PropWare-2.1.2-Generic.deb
. If cmake
is already installed, remove it with sudo dpkg -r cmake
.make
is the recommended build tool to use with PropWare. If it is not already installed, install it with sudo apt-get install make
.I am unable to produce easy installation packages for Mac. My apologies. Please execute the following lines at the command line to install PropWare on your Mac:
To upgrade:
Once you have confirmed that the new installation works as expected, remove the old one with the following two lines. NOTE: A command that starts with sudo rm -rf
has the potential to be very dangerous! I assume no responsibility if you corrupt your system. Be careful.